Aimpoint CompM4 Red Dot Scope w/ QRP II QD Mount-pro comp ACET sight m3 NEW



EBAY: This is not a weapon or a part of a weapon. The actual model name is CompM4 and it’s not associated with any sort of weapon, nor is it intended for any specific weapon. There are dozens of these same sights listed on ebay. Normal 0 false false false EN-US X-NONE X-NONE The Aimpoint® CompM4 sight, with high battery compartment, belongs to the CompM4 series sights which are the finest sights Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery! Complete and ready to mount The CompM4 sight is shipped complete with a QRP2 mount and standard spacer. These sights also come equipped with a killFlash® anti-reflection device and rubber lens covers. Integral mount The CompM4 sight features an integral mount that eliminates the need for a separate ring, and may also be customized with vertical and forward spacers to fit quite a few systems. Designed for 3rd generation night vision technology The CompM4 sight may also be used by those who need night vision compatibility. The performance of CompM4 sight is optimized for use with all generations of night vision devices (NVDs), but is ideal for 3rd generation night vision technology. The clearest, brightest image imaginable Aimpoint’s unique coating on the front lens reflects the dot’s selected frequency of red light at near 100% efficiency to give the highest imaginable dot brightness with the least amount of energy whilst other wavelengths in the visible and near-infrared a part of the spectrum pass with a minimum of reduction. This provides the clearest, brightest image imaginable when used with a 3rd generation Night Vision Device (NVD). Ready for use around the clock With 7 NVD-compatible brightness settings and 9 daylight settings including one extra-bright setting, the CompM4 sight is ready for round the clock use. Unique features of the CompM4 and CompM4s Compatible with every generation of NVDACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA batteryInternal voltage regulator allows the CompM4 to be used with any AA size battery 7 NVD settings and 9 daylight settings QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to make stronger operation and lower the risk of snagging on other gear Mount base is keyed into to the body of the sight to absorb recoil Mount base screws directly into the sight – no separate sight ring required. 500,000 hours of use on NVD setting 2 MOA dot for close combat and long distance engagement Matches perfectly with Aimpoint® 3XMag Unequalled light transmission Front lens opening is threaded for addition of killFlash® anti-reflective device.Submersible to 150 feet (45 meters) Vertical spacer includedImproved adjustment caps are easier to remove and safe against impactMechanical switch for speed and reliability Aimpoint® CompM4 GENERAL DATA Article number 11972 Technology ACET (Advanced Circuit Efficiency Technology) Working principle Reflex collimator sight – red dot sight OPTICAL DATA Lightsource LED (Light Emitting Diode) totally eye-protected Lightsource wavelength 650 nm red light Red dot size in MOA (minute of angle)* 2 Parallax Absence of parallax – No centering required Eye relief Unlimited Night vision compatibility Yes Anti-reflex coating all surfaces & multi-layer coating objective lens Yes Magnification No magnification (1X) ELECTRONIC DATA Battery One AA battery, accepts 1.5-5V – high battery compartment Battery life in hours ** 80 000 (over 8 years of continuous use) Battery life in hours **at NVD settings *** 500 000 Dot intensity adjustment Manual rotary switch – high switch location Daylight (DL) settings 9 DL of which one extra bright NVD settings 7 NVD MECHANICAL DATA Material housing Extruded high strength aluminum Surface finish Hard anodized, matte Color housing Black Adjustment 1 click 16mm at 100m, (1/2” at 80yds) Mounting methods Integrated QRP2 – (Quick release) ENVIROMENTAL DATA Temperature range -45° – +71° C, (50°- +160° F) Water resistance – submersible to 45m, (150ft) Radioactive components used None DIMENSIONS Length 120mm, (4.7”) Width/height sight only 53 x 60mm, (2.1” x 2.4”) Width/height including mount 72 x 72mm, (2.8” x 2.8”) Weight sight only 265g, (9.3oz) Weight sight with integrated mount 335g, (11.8oz) Thanks and please feel free to ask questions! Sorry, NO shipping outside of america! <div style=”text-align:center”><img src=”” border=”0″><br><table align=”center”><tr><td height=”28px” valign=”middle” align=”center”><font face=”arial” size=”2″><b><a href=”″>Dave9522 store</a></b></font></td><td><a style=”text-decoration:none” href=”″><img src=”” border=”0″></a></td></tr></table></div> <img src=”” border=”0″><br><a href=”″ target=”_blank”><img src=”” border=”0″></a> <div style=”text-align:center”><a style=”text-decoration:none” href=”″><img src=”” border=”0″></a></div>


There are no reviews yet.

Be the first to review “Aimpoint CompM4 Red Dot Scope w/ QRP II QD Mount-pro comp ACET sight m3 NEW”

Your email address will not be published. Required fields are marked *